I-SNS MK Series Double Acting Rotary Clamp Pneumatic Air Cylinder
Ikhodi ye-oda
Ukucaciswa Kwezobuchwepheshe
| Usayizi we-Bore(mm) | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 |
| Imodi Yokubamba | Umoya Ohlanzekile | |||||||
| Uketshezi Olusebenzayo | Ukwenza kabili | |||||||
| Max.Ingcindezi Yokusebenza | 1Mpa | |||||||
| Ingcindezi Encane Yokusebenza | 0.1Mpa | |||||||
| Fluid Temperature | Ukushintshwa kwamagnetic: -10 ~ + 60 ℃;Ukushintsha okungezona uzibuthe: -10~+70℃ | |||||||
| Isivinini sePiston | 50-200mm/s | |||||||
| Ukugcina umthamo | Isivimbeli serabha | |||||||
| Ukubekezelela Stroke(mm) | +0.6 -0.4 | |||||||
| Ukuthambisa | Asikho isidingo | |||||||
| I-Engeli Yokuzungeza Emuva | 90°±10° | |||||||
| I-Back-Rotation Direct | L/R | |||||||
| Ibanga Lokuzungezisa Emuva(mm) | 7.5 | 9.5 | 15 | 19 | ||||
| Ibanga Lokubamba(mm) | 10, 20, 30 | 10, 20, 30 | ||||||
| I-Bending Torque (Nm) evunyelwe | 1 | 3.8 | 7 | 13 | 27 | 47 | 107 | 182 |
| I-Clamping Force(N) | 40 | 75 | 100 | 185 | 300 | 525 | 825 | 1400 |
| Ukunemba Okungajikelezi Kwe-Piston Rod | ±1.4° | ±1.2° | ±0.9° | ±0.7° | ||||
| Usayizi wePort | M5X0.8 | 1/8″ | 1/4″ | |||||
Ubukhulu
| Imodeli | A | C | D | E | F | G | H | W |
| I-MKB12 | 25 | 15.5 | 5 | I-M3X0.5 | 5.5 | 11 | 6 | 9.5+I-stroke ecishiwe |
| I-MKB16 | 29 | 20 | 7 | M5X0.8 | 6.5 | 14 | 8 | 9.5+I-stroke ecishiwe |
| Imodeli | A | B | C | K | L | O | Q | R | S | U | W |
| I-MKB20 | 36 | 46.8 | 36 | 13.5±0.15 | 7.5 Iminyaka 0.15 | 20 0-0.25 | 72.5 | 62 | 31 | 4 | 6.5+I-stroke ecishiwe |
| I-MKB25 | 40 | 52 | 40 | 16 ±0.15 | 8±0.15 | 23 0-0.25 | 73.5 | 63 | 32 | 5 | 6.5+I-stroke ecishiwe |
| Imodeli | A | C | D | G | H | I | J | K | L |
| I-MKB32 | 45 | 34 | 14-0.1 -0.2 | 5.5 | 9 Ukujula7 | M10X1.5 | 12 | 20 ±0.15 | 7 ±0.15 |
| I-MKB40 | 52 | 40 | 14 -0.1 -0.2 | 5.5 | 9 dhlu7 | I-M10X1.5 | 12 | 24 ±0.15 | 7 ±0.15 |
| MKB50 | 64 | 50 | 17-0.1 -0.2 | 6.6 | 11 Ukujula 9 | I-M12X1.75 | 15 | 30 ±0.15 | 8 ±0.15 |
| I-MKB63 | 77 | 60 | 17-0.1 -0.2 | 9 | 14 Ukujula10.5 | M12X1.75 | 15 | 35 ±0.15 | 9 ±0.15 |
| Imodeli | O | P | Q | R | S | T | U | V | X | Y | Z | W |
| I-MKB32 | 14 | 4.5 | 93.5 | 71.5 | 37 | 7.5 | 16 | 1/8 | 3 | 300-0.62 | 6.5 | 15.5+Clami-ped stroke |
| I-MKB40 | 14 | 5 | 94.5 | 65 | 29.5 | 8 | 16 | 1/8 | 3 | 300-0.62 | 6.5 | 23.0+Clami-ped stroke |
| I-MKB50 | 19 | 7 | 112 | 76.5 | 34 | 10.5 | 20 | 1/4 | 3.5 | 370-0.62 | 7.5 | 28.0+Clami-ped stroke |
| I-MKB63 | 19 | 7 | 115 | 80 | 35 | 10.5 | 20 | 1/4 | 3.5 | 480-0.62 | 7.5 | 27.5+Clami-ped stroke |
| Imodeli | Bore | N | O | P | Q | R | S | G |
| I-MK-12-N | 12 | 8 | 29 | 20 | 4 | M3x0.5 | 8 | 8-18 |
| I-MK-16-N | 16 | 11 | 36 | 25 | 5 | M4x0.7 | 11 | 8-18 |
| MK-20/25-N | 20,25 | 14 | 51 | 35 | 7 | M6x1.0 | 16 | 12-22 |
| MK-32/40-N | 32,40 | 18 | 67 | 45 | 10 | M8x1.25 | 20 | 15-25 |
| MK-50/63-N | 50,63 | 22 | 88 | 65 | 10 | I-M10X1.5 | 22 | 30-40 |
